JET 708113A Gebrauchs- und Pflegehandbuch

Operating Instructions and Parts Manual 14-inch Woodworking Band Saw Model: JWBS-14OS WALTER MEIER (Manufactu

10 5. Standing on the right side of the sand saw (Figure 2), pull the motor towards you. 6. Place the belt (C, Fig. 5) around the wheel pulley (B, F

11 Upper Blade Guard Assembly Referring to Figure 8: Secure the upper wheel blade guard (A) to the upper support bracket post (B) with two each M6x10

12 Grounding Instructions This Band Saw must be grounded while in use to protect the operator from electric shock. In the event of a malfunction or

13 The 115V attachment plug supplied with the band saw must be replaced with a UL/CSA listed plug suitable for 230V operation, as shown in Figure 13.

14Adjustments Unplug the machine from the power source before making any repairs or adjustments. Failure to comply may cause serious injury. Tiltin

157. Guide new blade through table slot. Place blade in upper and lower blade guides. Note: The blade teeth should face the operator, and they shoul

16Adjusting Upper Blade Guide Assembly In Figure 19, the blade guard has been removed for clarity. Never operate the Band Saw without all guards in

17Optional Accessories 708717A JRB-14A Riser Block Kit Increases depth of cut from 6" maximum to 12" maximum. Includes 6" cast bl

18Troubleshooting JWBS-14OS Band Saw Trouble Probable Cause Remedy Saw stops or will not start. Saw unplugged. Check all plug connections. Fuse blo

19Body Assembly (JWBS-14OS Band Saw) Index No. Part No. Description Size Qty 1 ... JWBS14OS-101...Base ...

2Warranty and Service Walter Meier (Manufacturing) Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Aut

20Body Assembly (JWBS-14OS Band Saw) Index No. Part No. Description Size Qty 51 ... PWBS14-136 ...Stud Latch ...

21Body Assembly (JWBS-14OS Band Saw) Index No. Part No. Description Size Qty 113 ... TS-1540061 ...Hex Nut* ...

22Body Assembly (JWBS-14OS Band Saw)

23Open Stand Assembly (JWBS-14OS Band Saw) Index No. Part No. Description Size Qty 1 ... JWBS14OS-201...Stand Top...

24Electrical Connections

3Table of Contents Warranty and Service ...

4 Warnings 1. Read and understand the entire owner’s manual before attempting assembly or operation. 2. Read and understand the warnings posted on

5 19. Provide for adequate space surrounding work area and non-glare, overhead lighting. 20. Keep the floor around the machine clean and free of s

6Specifications Model Number ...

7Shipping Contents Contents of the Carton 01 – Body Assembly (1) 03 – Table (1) 04 – Trunnion Support Bracket (1) 05 – Motor (1) 06 – Switch Box (1)

8 Hardware Bag for Stand Assembly 01 – Carriage Bolt M8x16 (40) 02 – Serrated Hex Flange Nut M8 (40) Hardware Bag for Stand Assembly Tools Required

9Mounting Bandsaw to Stand The saw body is heavy! Use caution when lifting! Stabilize until firmly attached to the stand! Failure to comply may cau