JET 756041 Gebrauchs- und Pflegehandbuch Seite 1

Operating Instructions and Parts Manual Shear, Brake and Roll Machines Models SBR-30M, SBR-40M WALTER MEIER (Manufa

10 Figure 8 6.5.1 Lower Blade Adjustment Upper and lower shear blades have been factory aligned and should not require immediate adjustment. Should

116.6 Slip Roll set-up Do not roll material larger than 30” (40”), 20-gauge mild steel. The slip roll guard must cover the rolls except when materia

12 Grasp upper roll firmly, to prevent it falling out of machine. 4. Slip workpiece off end of roll. 5. Reinstall upper roll, and tighten screw an

137.0 Maintenance/Lubrication Use caution when doing maintenance work around the shear blades. 1. Apply #2 lithium tube grease once a month to the g

149.0 Troubleshooting Trouble Probable Cause Remedy SHEAR Material won’t cut. Incorrect blade gap. Adjust gap to accommodate thicker material. Mach

1510.1.1 SBR-30M Shear/Brake/Roll – Exploded View

1610.1.2 SBR-30M Shear/Brake/Roll – Parts List Index No. Part No. Description Size Qty 01 ... SBR30M-01 ...Frame (left) ...

17Index No. Part No. Description Size Qty 57 ... TS-1503031 ...Socket Head Cap Screw ... M6x12 ...

1810.2.1 SBR-40M Shear/Brake/Roll – Exploded View

1910.2.2 SBR-40M Shear/Brake/Roll – Parts List Index No. Part No. Description Size Qty 01 ... SBR40M-01 ...Frame (left) ...

2 1.0 Warranty and Service Walter Meier (Manufacturing) Inc., warrants every product it sells. If one of our tools needs service or repair, one of o

20Index No. Part No. Description Size Qty 57 ... TS-1504021 ...Socket Head Cap Screw ... M8x12 ...

3 2.0 Table of Contents Section Page 1.0 Warranty and Service ...

4 3.0 Safety Warnings 1. Read and understand entire owner’s manual before attempting assembly or operation. 2. Read and understand the warnings p

5 Familiarize yourself with the following safety notices used in this manual. This means that if precautions are not heeded, it may result in minor

6 5.0 Specifications Model Number ... SBR-30M ...

7 6.0 Set-Up and Assembly 6.1 Floor Diagrams Figure 1 – hole centers for Shear, Brake and Roll Figure 2 – hole centers for Stands (OPTIONAL)

86.2 Unpacking Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not d

9NOTE: For brake operation, install guide rods into upper set of holes (Figure 4); for shear operation, install in lower set of holes (Figure 5). 12.